Features and Improvements
- Auxiliary Files (SCRIPT and DATA Sections): Added a new Transient Script command: TSClearModelsForObjects(Object, Filter); The Object parameter is required while the filter is optional. This script will remove the transient stability model of the desired object/objects.
- Transient Stability: Added a feature on the Auto Insert Transient Stability contingency dialog to indicate whether to add 1 Open action of 2 actions (Open From and Open To) when adding actions to open branch objects. Previous it would always add 2 commands.
- Transient Stability: Added a feature on the Auto Insert Transient Stability contingency dialog to perform a number of Reclose Attempts and then an interval between the reclose attempts. In the past the general process was to add a fault and then open event. Consider an example: Event Time = 1.0 second; Event Duration = 0.1 seconds; Reclose Attempts = 2; Reclose Interval = 1.90 seconds. This will results in a transient contingency that does the following.
1.00 Fault
1.10 Open branch
3.00 Close branch an interval later (note: the fault will still be there)
3.10 Open branch again
5.00 Close device (attempt #2)
5.10 Open Branch