Branch Options: Display

Concept Link IconSee Also

 

The Display tab of the Branch Options dialog is available when opening the dialog by right-clicking on a display object.

Pixel Thickness

Thickness of the display object in pixels.

Anchored

If checked, the object is anchored to its terminal bus, which means that it will move when you move the terminal bus. See Anchored Objects for details.

Link to New Line

Use the Link to New Line button to create a new line corresponding to the entries you have made in the dialog. This button performs the same function as pressing Save. Note that adding a new line to the case in this way does not add a transmission line to the oneline display; the new line is present only in the model. You may then add the newly modeled line to the oneline diagram in the usual way (such as select Network > Transmission Line from the Individual Insert ribbon group on the Draw ribbon tab).

Symbol Segment

Only visible for transformer and series capacitor objects. This field specifies which "segment" of the branch contains the transformer or capacitor symbol. A segment constitutes a section of the line between vertex points of the line object, and are numbered starting at the from bus.

Symbol Size

Only visible for transformer and series capacitor objects. Specifies the size (width) of the transformer or capacitor symbol on the branch.

Symbol Percent Length

The distance or "length" of the symbol on the segment of the branch which contains it.

Show Detailed Line Vertices

When checking this option, a new group of information appears, showing the x,y coordinates of every vertex of the line. Additionally to being able to edit those locations, it is possible to shift or scale all the values with the buttons Shift All Values and Scale All Values, respectively.