Time Step Simulation: Custom Results Selection Dialog

Concept Link IconSee Also

 

This dialog is used to specify what objects and object fields will be stored during a Time Step Simulation and will be displayed on the Results grids. This dialog is opened using the View/Modify button on the Results page of the Time Step Simulation dialog.

To specify that a particular field be stored for a certain object:

  1. Click on the page of the object type to store (Areas, Buses, etc.)
  2. Set to YES the Time Selected field of those objects for which you want to store information.
  3. Click the Add/Remove Fields button to open the Select Fields dialog. Fields contained in the Selected Fields list will be stored for each of the selected objects. To move fields between the Available Fields and Selected Fields lists, drag the fields between lists or select fields and use the Add and Remove buttons as appropriate. Once the fields are selected click the OK button to save the changes and close the dialog.

Once you are done with the selections, press the Save and Close button to apply the customization. The Results grid pages will be filled with the corresponding columns after the Time Step Simulation starts.

Note that the actual results and the result customization will be stored in the .tsb file. For more information about saving the Time Step Simulation results, please read the Storing Input Data and Results section.

Fields for Areas, Buses, Generators, Injection Groups, Interfaces, Lines, Loads, Owners, Super Areas, Switched Shunts, Transformers, and Zones can be specified to be displayed on the grids and stored in the .tsb file.