Time Step Simulation: Results Grids

Concept Link IconSee Also

 

These are the grids of the Results page that contain Time Step Simulation results based on the fields and objects selected using the Custom Results Selection Dialog. The fields and objects must be selected before the time step simulation run is started in order for those results to show up in the grids.

There is one page for each type of object: Areas, Buses, Generators, Injection Groups, Interfaces, Lines, Loads, Owners, Superareas, Switched Shunts, Transformers and Zones.

These pages are all Matrix Grids. Each column of a grid corresponds to a field of a specific object of the power system, e.g., KV voltage of bus 1. Each row of the grid corresponds to a timepoint.

Note that you can plot the results of the grid versus the timepoint date time by right-clicking on the grid and selecting Set/Toggle/Columns > Plot Column(s) from the local menu.