Quick Filter
Quick filters are essentially the same as an advanced filter, including the pre-filter option using Area/Zone/Owner filters, but is not saved as an advanced filter with the load flow case. A quick filter applies the filter criteria immediately without requiring naming and saving the filter definition. A quick filter can be expanded to multiple criteria, either at the time the quick filter is initially defined, or at a later time by clicking on another column, choosing Quick Filter again, and setting the additional criteria for the selected column. Criteria points can also be removed by viewing the Quick Filter definition and clicking the X next to each criteria you want removed from the quick filter. If you decide to save the Quick Filter definition as an advanced filter, click the Find... button to open the Advanced Filters dialog. The Quick filter criteria will be added to the dialog. You can then apply a filter name and save the criteria as an advanced filter for later re-use.
Added more options to drop down in Version 20
When clicking the Quick Filter drop down on the Case Information Toolbar, a sub menu appears which has the following options.
Dialog : This will open the Quick Filter dialog for defining a quick filter in the same way an advanced filter is defined.
Clear : This will clear out the conditions in the Quick Filter and also remove the filter from the present case information display
Logic DropDown: This allows you to change the Boolean logic of the Quick Filter to AND, OR, NAND, NOR, XOR, or ONETRUE
Add VariableName = 123.56: click on the menu item with this syntax to add a new filter condition to the Quick Fitler.
Add Selected = YES : click on this menu to add a new filter condition that the Selected Field equals YES
Add Selected = NO : click on this menu to add a new filter condition that the Selected Field equals NO