Machine Model: GENTPJ

Following checks and corrections are applied during Validation and AutoCorrection.

• If Xdp > Xd then Xdp = 0.8*Xd
• If Xdpp > Xdp then Xdpp = 0.8*Xdp (not done if Tdopp = 0)
• If Xdpp < 0.05 then Xdpp = 0.05 (not done if Tdopp = 0)
• If Xqp > Xq then Xqp = Xq
• If Xqpp > Xqp then Xqpp = 0.8*Xqp
• If (Tdopp > 0) and (Tqop = 0) and (Xqpp > 0.25*Xq) then Xqpp = 0.25*Xq
• If Xqpp > 1.5*Xdpp then Xqpp = 1.5*Xdpp
• If Xqpp < 0.01*Xdpp then Xqpp = Xdpp (assume near zero value was a mistake and set equal)
  Else if Xqpp < 0.5*Xdpp then Xqpp = 0.5*Xdpp (don't allow them to be wildly different)
• Xqp: Check if Xqp = 0 which means that Xqp = Xq, then Xqp is changed to Xq. Also if Xqp = 0, but Tqop = 0 which indicates that you must have Xqp = Xq. Xqp will be treated as though it is equal to Xq.