Generator Options: Owners, Area, Zone, Sub

Concept Link IconSee Also

 

This information is located on the Generator Information Dialog.

This tab is used to display or change the generator’s owner information, area information, zone information, and substation information.

 

Same Owner as Terminal Bus

Read-only check-box that indicates whether the generator’s owner is the same than the terminal buses’ owner.

Owners

Currently, Simulator supports up to four owners for generators. To add an owner of a generator, change one of the Owner fields to a new owner number, and update the owner percentages accordingly. To modify an owner's percentage of ownership, simply modify the value in the percentage field for that owner. If you set the percentage of an owner to 0, that owner will be removed from the list of owners for the device. You can also remove an owner from owning part of a device by changing the owner field for that owner to 0. Note that if you do not set the new owner percentages of all specified owners such that the total is 100%, Simulator will normalize the percentages such that the total is 100% when you click Save or OK on the generator dialog.

Area Number, Area Name

The area number and name to which the generator belongs. Note that you can change the area of the generator to be different than the area of the terminal bus. If you do so, you will be prompted to confirm that you wish to place the generator within a different area than that of the bus to which it is electrically connected.

Zone Number, Zone Name

The zone number and name to which the generator belongs. Note that you can change the zone of the generator to be different than the zone of the terminal bus. If you do so, you will be prompted to confirm that you wish to place the generator within a different zone than that of the bus to which it is electrically connected.

Substation Number, Substation Name

The name and number of the substation to which the generator belongs, and it is the same than that of the terminal bus.