Contingency Options: Generator Post-Contingency AGC

Concept Link IconSee Also

 

The Generator Post-Contingency AGC display can be opened from the Modeling group of the Contingency Analysis dialog Options page. This display provides a specialized generator display with specific fields used for setting the post-contingency AGC response of individual generators.

Set the Post-CTG Prevent AGC Response field to indicate whether or not a generator should be on AGC post-contingency. By default, generators are NOT set to prevent AGC response post-contingency. Possible options for this field are:

YES - This means that the generator will NOT respond post-contingency. AGC is disabled post-contingency regardless of the generator's AGC setting.

NO - This means that the generator will respond according to its AGC setting. If AGC = YES then the generator will respond post-contingency.

RESPOND - This means that the generator WILL respond post-contingency. AGC is enabled post-contingency regardless of the generator's AGC setting.

Use the Post-CTG Part. Factor field to specify the participation factor to be used post-contingency. A value of same indicates that the generator should use the same participation factor as set with the generator record Part. Factor field. Otherwise, set a numerical value for the post-contingency participation factor to use a factor other than the normal participation factor.